Paper Source option, Media Type option

215.9mm). The length can be from 4.1 to 14 inches (104.1 x 355.6 mm).

Media Type option

Click on the arrow next to the Media Type setting to select one of the following types of paper from the drop-down list:

When you select the Media Type, the Windows driver changes printer modes. You can experiment with different settings to see the results you can achieve on different types of media. You may find that you can produce higher quality printing on plain paper using the Transparency mode.Because each situation is different, Canon cannot guarantee better output output for a particular medium other than the recommended choices.

Plain Paper

This mode is for printing on ordinary paper. This selection sets the dots generated by the printer to yield the highest quality printed image for this type of paper with minimal bleeding.

∙When you select Plain Paper, the Paper Source defaults to Auto Sheet Feeder and the Print Quality defaults to Normal, 360 x 360 dpi.

∙When you are printing on plain paper, set the paper thickness lever (inside the printer) to the left position.

Transparency

This mode is for printing on transparency stock. Use the Canon Transparencies (Q07-0001-M1) to achieve the highest possible color fidelity.

∙When you select Transparency, the Paper Source defaults to Auto Sheet Feeder and the Print Quality defaults to Fine, 360 x 360 dpi.

∙When you are printing on transparencies, set the paper thickness lever (inside the printer) to the left.

∙When manually feeding paper, change the Paper Source to Manual Feed and make sure the paper selection lever is set to the front position.