Canon BJ-200ex manual Printing on Envelopes

When you are ready to print on transparencies, open your document withing your software application and define any special print options you can from within your print driver. For example, if you are using Windows, you can specify the Paper Size, Media Type, Paper Source, Print Selection, and Print Quality from within the printer driver.

Once your software and driver are ready to print, you can set up the printer for auto feed or manual feed. Both methods are described earlier in this chapter.

Follow these guidelines when automatically feeding stacks of special paper.

§When automatically feeding transparencies, remove each sheet after it is delivered. Do not allow transparencies to stack up in paper output tray.

§Let the printed transparencies dry completely before storing them. The complete drying time required for Canon's transparencies is approximately 15 minutes.

§When a transparency has dried completely, cover its printed side with a sheet of plain (not coated) paper before stroing it; this is recommended even if you place the transparency in a clear file.

Printing on Envelopes

You can stack up to 15 envelopes in the sheet feeder or you can manually feed envelopes one at a time.