2.Press and hold the LF/FF button.
3.Press the PRINT MODE button.
§The printer beeps twice and the indicator for the current print mode blinks to indicate the printer is in 2/3 reduction mode.
§To set the printer in 1/2 reduction mode, press and hold the LF/FF button and press the PRINT MODE button again. The printer beeps three times.
4.Load paper and begin your print operation.
This mode may be overridden by your software.
To disable reduction mode, press and hold the LF/FF button and press the PRINT MODE button (a third time). The printer beeps once. When the indicator for the current print mode (either HQ or HS) is on and not blinking, reduction mode is cancelled. You can also turn off the printer.
Selecting reduction mode cancels envelope mode (if set), and selecting envelope mode cancels reduction mode (if set).
Performing Automatic Line Feeds
You can set the printer so that it performs an automatic line feed each time it receives a carriage return. Then, when the printer receives a carriage return code from the computer, it moves to the beginning of the next line.
You only need to set this function if you are using an application program that does not include a carriage return with a line feed.
To set the automatic line feed function, follow these steps:
1.Make sure the printer is turned off.
2.Press and hold the ON LINE, LF/FF, and PRINT MODE buttons, and then press the POWER button until the beeper sounds.
If you notice an extra blank line between each line printed, be sure to cancel this function.
To cancel the automatic line feed function, turn off the printer.
