Canon BJ-200ex manual Using the Reduction Modes, Two-thirds Reduction Mode

Select your print mode as follows:

§Use HQ mode for most of your printing needs. The printer automatically prints in HQ mode unless you change the mode with the PRINT MODE button.

§Use the smoothing mode when you are printing enlarged characters with an MS-DOS application. When Smoothing is enabled, the printer refines your output by polishing away the jagged edges and ragged stair-stepping curves of the characters. This results in sharp and crisp print at 720 x 360 dpi. The print speed is slower than HQ mode.

§Use the HS mode when you are printing draft documents. Your document will print faster but the print density will be less than in HQ mode. HS mode uses half the amount of ink as HQ mode.

Selecting reduction mode cancel Smoothing mode (if set).

Using the Reduction Modes

The printer supports two reduction modes for printing spreadsheets and other wide documents on regular paper. In reduction mode, the printer reduces the out put to two- thirds or one-half of its full size.

Two-thirds Reduction Mode

In two-thirds reduction mode, the printer automatically sets the print dimensions as follows:

Top Margin:	0.32-inch
Left margin:	0.35-inch
Print width (max):	7.8 inches