Toshiba 850, 720 manual Press the Start button, Place the next original, and press the Start button

2	Place the original(s). See the following
	pages to set the originals.
	•	P.51	“Originals sizes and types”	2
	•	P.54	“Placing originals on the glass”
	•	P.56	“Using the Reversing Automatic Document Feeder”
	The originals are copied in the order of being scanned.

3 Select the copy modes as required. When you want to copy more than one set, key in the desired number of copies.

• Press the [CLEAR] button on the control panel to correct the number keyed in.

• Note that some combinations of copy modes are restricted. ( P.329 “4.Copying Function Combination Matrix”)

•Once the [START] button on the control panel has started, any change in copy modes (including setting of the previously divided sets of originals) cannot be applied afterward.

4 Press the [START] button.

• Copying starts.

When you copy by placing originals on the original glass (e.g. using the sort mode, or making 1-sided original 2-sided copies), the data of these originals are scanned into the memory. In this case, proceed to steps 5 and 6.

5 Place the next original, and press the [START] button.

•Data scanning of this original starts.

•The next original will also be scanned in the same manner when you press the [YES] button on the touch panel, and then press the [START] button on the control panel.

•Repeat the above procedure until the scanning of the last page of the original finishes.

49