Toshiba 720, 850 manual Setting Copy Paper

4. Setting Copy Paper

About the “width” and the “length” of the original and the copy paper

Originals and copy paper whose size is LT can be set in both portrait and landscape directions. In the size

1 descriptions of original and copy paper throughout this manual, “A” in the figure below is called “length” and “B” is called “width”. (In the figure below, the operator is standing in front of the equipment.)

A B

When “B” is shorter than “A”, it is called “placing the original in a portrait direction.”

A

B

When “B” is longer than “A”, it is called “placing the original in a landscape direction.”

A

B

In this manual, when an original or copy paper which can be set in both in portrait and landscape direc- tions is placed horizontally, its paper size is identified by adding “-R” at the end. (e.g. “LT-R”)

34 1.BEFORE USING EQUIPMENT