Toshiba 850, 720 manual Jam Symbols, 267, Procedure of clearing a paper jam

4. Jam Symbols

When a paper misfeed occurs in the equipment, the jam symbol blinks in the positions where the paper is misfed. Follow the guidance on the touch panel to remove the misfed paper propery.

•The misfed paper may not be on the correct position as shown in the illustration depending on the tim- ing of the misfeeding.

1 (2) 3 4 5 6 7

	12	11	10	9	8
1.	Finisher or Saddle Stitch Finisher (optional)
2.	Hole Punch Unit (optional)
3.	Inserter Unit (optional)
4.	Reversing Automatic Document Feeder
5.	Inside of the equipment (paper exit area)
6.	Inside of the equipment (paper transport area)
7.	Bypass tray
8.	External Large Capacity Feeder (optional)
9.	Inside of the equipment (paper feed area)
10. Inside of the equipment (duplex unit area)					9
11.	Inside of the equipment (reversing area)

12. Saddle Stitch Unit of Saddle Stitch Finisher (optional)

Procedure of clearing a paper jam

When misfeeding occurs, remove the misfed paper by means of the following procedure.

Reversing Automatic Document Feeder (		P.269)
↓
Bypass tray ( P.272)
↓
External Large Capacity Feeder (optional) (		P.272)
↓
Finishing device (optional) (	P.274)
(including the Hole Punch Unit and Inserter Unit)
↓
Inside of the equipment (	P.282)

267