Toshiba 720, 850 manual Toshiba-recommended paper / Handling and storing paper, Recommended paper

4.Setting Copy Paper (Cont.)

	Toshiba-recommended paper / Handling and storing paper
1	Recommended paper
	To make copies with a fine image, the following types of paper are recommended.
	If you wish to use copy paper other than the recommended types, consult your service technician.

Paper type	Toshiba recommendations/Manufacturer		Mode
Plain paper	TIDAL/Hammermill (20 lb. Bond)		PLAIN
Thick	Laser/Hammermill	(24 lb. Bond)	THICK1
		(32 lb. Bond)	THICK2
	Exact Index/WAUSAU	(90 lb. Index)	THICK2
		(110 lb. Index)	THICK3
Tab paper	CopyTabs/Blanks USA		TAB
Tracing paper	Tracing Paper/Ostrich International (20 lb. Bond only)		PLAIN
Sticker labels	5165/Avery		THICK3
OHP film *	PP2500L/3M		OHP FILM
	X-10.0/Folex		OHP FILM

*Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.

Handling and storing paper

Pay attention to the following points:

•Avoid using paper that is specially treated or previously printed on another machine, and also avoid performing double copying on the same side of the paper, since this may cause a malfunction.

•Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or tough paper; this may cause paper misfeeds.

•Paper should be wrapped in its wrapping and stored in a damp-free place.

•To prevent paper from being folded or bent, store it evenly on a flat surface.

36 1.BEFORE USING EQUIPMENT