Toshiba 850, 720 manual 133, Press the Start button

6 Enter the values read in step 5 for the specified area, and then press the [SET] button. Set 4 values in order.

• After the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you	5
specify other areas. Up to 4 areas can be specified on an original.

•To correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted field move one position upward. Highlight the field in which you want to rectify the value, and then key in the correct one.

•If the [RESET] button is pressed while the X1 field is highlighted, all values in the fields will become “0”.

7 Press the [ENTER] button after specifying the area.

8 Place the original(s) with its face down.

• Set the original face down with its bottom toward you and fit its top left corner against the top left corner of the original glass.

• Select other copy modes as required.

9 Press the [START] button.

133