Toshiba 720, 850 manual Bypass Copying

6.Bypass Copying (Cont.)

Bypass copying on standard size paper

Making bypass copies on LD, LT, LG and ST-R

1 Place some sheets of paper with their

2 copy side up on the bypass tray, and align the side guides to the paper length.

• The message “Ready for bypass feeding” appears.

• Rear side of the side guides of the bypass tray has an indicator for paper height. The height of the sheets must not exceed this indicator.

• When you use more than one sheet, fan the sheets well before setting them on the tray.

•Do not push the sheets into the entrance of the bypass feeder; this may cause a paper jam.

When the paper size is larger, draw out the three-stage paper holder.

2 Place the original(s).

3 Press the button of the same size as the one of the paper you have set on the tray.

• If the paper size is not specified here, some operations such as cleaning may slow down the copying.

64 2.HOW TO MAKE COPIES