Toshiba 850, 720 manual Using the digital keys, Recalling dimensions registered in the memory

3

4

Press the [NON STANDARD] button on the touch panel.

2

Set each dimension following the procedure below.

Using the digital keys

Key in the value in [Length] and press the [SET] button on the touch panel. Set the width in the same way and press the [ENTER] button.

Recalling dimensions registered in the memory

Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall the dimension data registered previously, and then press the [ENTER] button.

• Maximum paper size to be set: 297 mm (11.69") (length) x 432 mm (17.01") (width)

• To register the dimension data in the memory, see P.70 “Registering non-standard size in the memory”.

• Set other copy modes as required.

5 Press the [START] button on the control panel.

69