GE 200D9366P020, 49-60612 Before YOU Begin, Preparation, Materials YOU MAY Need not included

Installation Instructions

Refrigerator

Models 21 and 25

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com

In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Refrigerator Installation

20 minutes

Water Line Installation 30 minutes

Anti-Tip Bracket Installation

20minutes

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

PREPARATION

MOVING THE REFRIGERATOR INDOORS

If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer can be removed.

•To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section.

•To remove the freezer drawer, see the Removing the Freezer Drawer section.

WATER SUPPLY TO THE ICEMAKER AND DISPENSER (ON SOME MODELS)

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shut-off valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.com (in Canada at www.GEAppliances.ca) or from Parts and Accessories, 800.626.2002 (In Canada 1.800.661.1616).

MATERIALS YOU MAY NEED (not included)

Lag Bolts Anchor Sleeves

Drill Bit Appropriate for Anchors

For Anti-Tip Bracket Mounted on CONCRETE Floors Only

TOOLS YOU MAY NEED
Adjustable Wrench	3/8￿ and 5/16￿Socket
	Ratchet/Driver
1/4￿Outer Diameter
Compression Nut	Phillips-Head Screwdriver
and Ferrule (sleeve) (icemaker
models only)
3/32￿, 1/8￿and 1/4￿Allen
	wrenches
1/8￿Drill Bit and	Tape measure
Electric or Hand Drill
Pencil	1/4￿Nut Driver
Wire Cutters	Level

17