Safety Instructions

About the freezer.

Not all features are on all models.

Freezer Shelves and Baskets

A shelf above the ice storage bin

A half-width basket

A deep full-width basket with divider

Appearance and features may vary

Operating Instructions

Installation Instructions

Tips

Basket Removal

To remove the deep full-width basket:

Open the freezer drawer until it stops.

Lift the freezer caddy up.

Pull the divider forward until the rear locating tabs are out of the slots. Turn the divider slightly to the side to release the front locating tabs and lift out.

The freezer basket rests on the metal slide brackets and is held in place with swing locks.

Turn the swing locks from verticall to horizontal position.

Open the refrigerator doors.

Lift the basket up and rotate it toward you. Slide out from the side of the drawer.

When replacing the deep full-width basket:

Tilt the basket toward you and lower it into the drawer.

Place the basket onto the metal slide brackets and over the swing locks.

Turn the swing locks from horizontal to vertical position to lock the basket

in place.

Turn the divider slightly to one side so the tabs on the front fit into the vent slots on the basket. Position the divider so the back locating tabs snap into place in the back vent slots.

Lower the freezer caddy ensuring the hook fits over the front edge of the bottom freezer basket. Push down to secure.

Troubleshooting

Tabs

To remove the half-width basket:

Tabs

Pull the basket out to the stop location.

Lift the basket up at the front to release it from the slides.

Lift the back up and out of the slide.

CAUTION:Always be sure to fully close this basket.

When replacing the basket, make sure that the wire tabs and wire hooks on the sides of the basket go into the slots in the top

of the upper basket slides.

Appearance may vary

10

Page 10
Image 10
GE 49-60612, 200D9366P020 About the freezer, Troubleshooting, Freezer Shelves and Baskets, Basket Removal