Instructions
Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
Instructions Safety
Refrigerator Lights
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back.
Rotate the shield down and then forward to release the tabs at the front of the shield.
After replacing with an appliance bulb of the same or lower wattage, replace the shield.
Plug the refrigerator back in.
NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002.
Operating
Installation Instructions
Light
Shield
Appearance may vary
Freezer Light
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
Remove the freezer basket for access. The bulb is located at the rear of the freezer inside a light shield.
To remove, grasp the shield at the top and pull out to release the tabs at the bottom.
After replacing with an appliance bulb of the same or lower wattage, replace the shield and freezer basket.
Plug the refrigerator back in.
Consumer Support Troubleshooting Tips
14
