Billion 800VGT Router
PPTP Connection - Remote Access
Connection Name: A
Type: Select Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. your office server), select Dial In if you want your router to operate as a VPN server.
When configuring your router as a Client, enter the remote Server IP Address (or Domain Name) you wish to connection to.
When configuring your router as a server, enter the Private IP Address Assigned to Dial in User address.
Username: If you are a
Password: If you are a
PPPAuthentication Type: Default is Auto. This is the correct setting if you want the router to determine which authentication type to use, or else you can manually specify CHAP (Challenge Handshake Authentication Protocol) or PAP (Password Authentication Protocol) if you know which type the server is
using (when acting as a client) When acting as a server, specify the authentication type you want clients connecting to your router to use. When using PAP, the password is sent unencrypted, whilst CHAP encrypts the password before sending, and also allows for challenges at different periods to ensure that an intruder has not replaced the original client.
Data Encryption: Data sent over the VPN connection can be encrypted by an MPPE algorithm. Default is Auto and this means that this setting is negotiated when establishing a connection. Alternatively, you can manually Enable or Disable encryption.
Key Length: The data can be encrypted by MPPE algorithm with 40 bits or 128 bits. Default is Auto which means that it is negotiated when establishing a connection. 128 bit keys provide stronger encryption than 40 bit keys.
Mode: You may select Stateful or Stateless mode. The key will be changed every 256 packets when you select Stateful mode. If you select Stateless mode, the key will be changed in each packet.
Idle Time:
Active as default route: If you select this option while using
Click Apply button to apply your changes
71
