Billion Electric Company 800VGT 102, SIP Device Parameters, How to register with a SIP Server

Billion 800VGT Router

SIP Device Parameters

SIP: Select whether you wish to use SIP as VoIP call signaling protocol. The default setting is Disable.

Silence Suppression (VAD): Voice Activation Detection (VAD) prevents the transmission of silence since it will unnecessarily consume your bandwidth. This function is also known as Silence Suppression, and it is a software application that ensures the bandwidth is used only when voice activity is activated. The default setting is Enable.

Echo Cancellation: G.168 echo cancellation is an ITU-T standard. It is used for removing the echo while you are on the phone. If it is enabled, this will mean that you will not hear too much of your own voice on the phone while you talk. The default setting is Enable.

RTP Port: Provide the base value for the media (RTP) ports. These ports are assigned to various

endpoints and the different call sessions that may exist within an end-point. (Range from 5100 to 65535, default value is 5100)

Region: This selection is a drop-down box, which allows user to select the country for which the VoIP device must work. When a country is selected, the country parameters are automatically loaded.

Voice QoS,: Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP Marking allows users to assign specific application traffic to be executed in priority by backbone Routers, based on the DSCP value. See Table 4. The DSCP Mapping Table:

Note: To be sure that all the router(s) through-out the QoS network backbone have the capability of executing and checking the DSCP..

Setting for Phone Port 1

Registrar Address(or Hostname): Indicate the SIP registrar IP address.

Registrar Port: Specify the port on which the SIP registrar listens for register requests from VoIP devices.

Expire: Expiry time for registration message sending.

User Domain/Realm: Set a different domain name for the SIP proxy server.

Outbound Proxy Address: Indicate the SIP outbound proxy server IP address. This parameter is very useful when your VoIP device is behind NAT.

Outbound Proxy Port: Specify the port on which the VoIP SIP outbound proxy will listen for messages.

Setting for Phone Port 2

Please refer to the descriptions in “Setting for Phone Port 1”.

How to register with a SIP Server

1)On the Wizard Section page, select your VoIP Service Provider and provide information in the following fields: Phone Number, Authentication Username and Authentication Password.

2)On the Wizard Section page, click Apply to apply the settings.

3)On the General Settings page, make sure the general VoIP SIP information is correctly inserted.

4)On the General Settings page, click Apply to apply the settings.

5)On the General Settings page, click Synch Now to register the account(s) with your VoIP server.

102

Chapter 4: Configuration