Billion Electric Company 800VGT Click Delete, Click Add TCP/UDP Filter, Configuring Packet Filter

Billion 800VGT Router

Configuring Packet Filter:

1.Click Port Filters. You will then be presented with the predefined port filter rules screen (in this case, for the low security level) shown below:

Note: You may edit the predefined rule instead of deleting it. This is an example showing to how you add a filter on your own.

Click Delete

2.Click Delete to delete the existing HTTP rule.

3.Click Add TCP/UDP Filter.

Click Add TCP/UDP Filter

4.Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source/Destination Port, Inbound and Outbound.

Example:

Application: WEB_HTTP

Time Schedule: Always On

Source / Destination IP Address(es): 0.0.0.0 (Allow all addresses)

Type: TCP (Please refer to Table1: Predefined Port Filter)

Source Port: 0-65535(I allow all ports to connect with the application))

Destination Port: 80-80(Internal port defined for HTTP)

Inbound / Outbound: Allow

62

Chapter 4: Configuration