HP 7000 dl Router manual Telnet address, Enable #telnet 10.200.4.15 User Access Login Password

SROS Command Line Interface Reference Guide Enable Mode Command Set

telnet <address>

Use the telnet command to open a Telnet session (through the Secure Router OS) to another system on the network.

Syntax Description

<address> Specifies the IP address of the remote system.

Default Values

No default value necessary for this command.

Command Modes

> or # Basic or Enable Command Mode

Usage Examples

The following example opens a Telnet session with a remote system (10.200.4.15):

>enable

#telnet 10.200.4.15 User Access Login Password:

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 194