VIVOTEK

A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold.

Percentage = 30%

If you want to configure other motion detection settings for schedule mode, please click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion detection windows can be configured on this page as well.

Video(TCP-AV)

 

2011/01/17 13:44:17

Please follow the steps below to set up a profile: 1� Create a new motion detection window�

2� Check Enable this profile

3� Manually enter a time range for Schedule mode�

4� Click Save to enable the settings and click Close to exit the page�

This motion detection window will also be displayed on the Event Settings page� You can go to Application > Event Settings > Trigger to choose it as a trigger source� Please refer to page 83 for detailed information�

User's Manual - 75

Page 75
Image 75
Vivotek IP8132 manual Check Enable this profile