VIVOTEK
■ Keep current value
Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions�
1� Set the White balance to Auto and click Save�
2.Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color temperature automatically�
3.Select Keep Current Value to confirm the setting while the white balance is being measured.
4� Click Save to enable the new setting�
Image Adjustment
■Brightness: Adjust the image brightness level, which ranges from
■Saturation: Adjust the image saturation level, which ranges from
■Contrast: Adjust the image contrast level, which ranges from
■Sharpness: Adjust the image sharpness level, which ranges from
Enable Noise Reduction
Noise reduction is the process of removing noise from a signal� Select reduction for the Gaussian (video amplifier thermal noises often occur in the the dark area of an image) or Impulse (audio clicks and pops due to electromagnetic interference)� Select the type of noise to remove or select Both Faussian and Impulse and enter a value from 1 to 63 to set the degree of enhancement required�
You can click Preview to view the expected results, or click Restore to recall the original settings without incorporating the changes� When completed with the settings on this page, click Save to enable the setting and click Close to exit the page�
Privacy Mask
Advanced Mode
Click Privacy Mask to open the settings page� On this page, you can block out sensitive zones to address privacy concerns�
2011/01/17 13:44:17 |
|
| 2011/01/17 13:44:17 | |
|
|
|
|
|
|
|
|
|
|
■To set the privacy mask windows, follow the steps below:
1� Click New to add a new window�
2� Use the mouse to size and
3� Enter a Window Name and click Save to enable the setting� 4� Select Enable privacy mask to enable this function�
66 - User's Manual
