VIVOTEK
User's Manual - 49
Wireless (IP8133W)

Manual Conguration:

Setting up wireless cameras’ connections can be tricky� The configuration process involves hardwire
connection to your LAN for initial setup and wireless connection to AP� To switch between the connection
types, you have to physically disconnect the 5V DC connector. For example, when you are nished with
initial setup via LAN, you have to remove the RJ-45 LAN cable and disconnect the DC power jack, and
then reconnect the power�
When you are performing the initial setup via LAN, the wireless antenna can be left in place�
To set up a wireless connection with the camera,
1� You must already have a wireless AP and wireless connection available� Find out the name of your
wireless network by a click on your Windows System Tray� Jot down the name of the network�
2. You may need to set up static IPs for making a wireless connection. You can nd related information
using the “ipcong“ command in a command prompt window.
For connection using the wireless Ad-hoc mode, please
refer to page 58�