VIVOTEK

2� WEP (Wired Equivalent Privacy): This allows communication only with other devices with identical

WEP settings�

Authentication Mode: Choose one of the following modes. The default setting is “Open”. Open – Communicates the key across the network.

Shared – Allows communication only with other devices with identical WEP settings.

Key length: The administrator can set the key length to 64 or 128 bits.

The default setting is “64 bits”�

Key format: Hexadecimal or ASCII. The fault setting is “HEX”. HEX digits consist of the numbers 0~9 and the letters A-F�

ASCII is a code for representing English letters as numbers from 0-127 except “, <, > , and the space character which are reserved�

Network Key: Enter a key in either hexadecimal or ASCII format.

You can select different key lengths, the acceptable input lengths are as follows: 64-bit key length: 10 Hex digits or 5 characters.

128-bit key length: 26 Hex digits or 13 characters.

NOTE:

When 22(“), 3C(<), or 3E(>) are input as network keys, the key format cannot be changed to ASCII format�

52 - User's Manual

Page 52
Image 52
Vivotek IP8132 manual Vivotek