VIVOTEK
Application
Advanced Mode
This section explains how to configure the Network Camera to responds to particular situations
(event)� A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or
As shown on the right, an event can be triggered by many sources, such as motion detection, PIR (Passive Infra Red motion detector - IP8133 & IP8133W), or external digital input devices� When an event is triggered, you can specify what type of action
that will be performed. You can configure the Network Camera to send snapshots or videos to your email address or FTP site�
Event Trigger | Action |
ex. Motion Detection, Digital Input, System Reboot
Media | Server |
(what to send) | (where to send) |
ex. Snapshot, Video Clips, | ex. Email, FTP, HTTP Server, |
System Log, Digital Output | Network Storage |
User's Manual - 81