Lexmark 4600, 3600 manual Printing photos from a PictBridge-enabled digital camera

Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the camera to control printing photos.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the camera.

2Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

•Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a USB storage device, or an error message will be displayed on the printer control panel. For more information, see the camera documentation.

•The printer reads only one media device at a time.

Warning—Potential Damage: Do not touch the USB cable, any network adapter, any connector, or the printer in the area shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not remove the USB cable or network adapter while actively printing from a PictBridge-enabled digital camera.

3If the PictBridge connection is successful, then the following message appears on the display: PictBridge

Camera detected. Press OK to change settings.

4Use the camera to choose and print photos. If desired, you can also use the Pictbridge menu to select the paper size, paper type, photo size, and layout of the photos that you want to print.

Press to access the PictBridge menu, and then press each time you make a selection.

Working with photos

80