Lexmark 3600, 4600 Select The Wireless Port, b Click Control Panel, b Click Printers and Faxes

SELECT THE WIRELESS PORT

If you have previously set up your printer as a locally attached printer, you may need to select the wireless printer to use the printer wirelessly.

1Do one of the following:

In Windows Vista a Click .

b Click Control Panel.

c Under Hardware and Sound, click Printer.

In Windows XP a Click Start.

b Click Printers and Faxes.

In Windows 2000 a Click Start.

b Click Settings Printers.

2Right-click the printer, and then select Properties from the menu.

3Click the Ports tab.

4Locate the selected port. The selected port has a check in the Port column.

5If the Description column of the selected port indicates that it is a USB port, scroll through the list and select the port with Printer Port in the Description column.

6Click OK, and then try to print again.

Wi-Fi indicator light is blinking orange during installation (Windows only)

When the Wi-Fi indicator light is blinking orange, it indicates that the printer has been set up for wireless networking but cannot connect to the network for which it has been configured. The printer may be unable to join the network because of interference, its distance from the wireless access point (wireless router), or until its settings are changed.

These are possible solutions. Try one or more of the following:

MAKE SURE THE ACCESS POINT IS ON

Check the access point and, if necessary, turn it on.

MOVE YOUR ACCESS POINT TO MINIMIZE INTERFERENCE

There may be temporary interference from other devices such as microwave ovens or other appliances, cordless phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to these devices.

Troubleshooting

117