Lexmark 4600, 3600 manual Resetting to factory settings, Ordering paper and other supplies, 102

Ordering paper and other supplies

To purchase supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.

For best results when printing photos or other high-qualityimages, use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper and Lexmark print cartridges.

Item

Lexmark Photo Paper

Lexmark PerfectFinish Photo Paper

USB cable

Description

•Letter

•A4

•4 x 6 in.

•10 x 15 cm

•Letter

•A4

•4 x 6 in.

•10 x 15 cm

•L

Part number 1021294

Resetting to factory settings

Resetting all settings

You can reset your printer to the original settings without using the printer menus.

Note: Resetting to factory default settings will delete all the printer settings you have previously selected.

1Turn off the printer.

Note: Make sure the printer is not in Power Saver mode. Press and hold for 2 seconds to turn off the printer. If you have set the Power Saver timeout in the Setup menu, press and hold according to the time you set in the menu.

2From the printer control panel, press and hold and , and then press to turn the printer on.

Resetting menu settings

1From the printer control panel, press .

2Press the arrow buttons until Defaults appears, and then press .

3Press the arrow buttons until Set Defaults appears, and then press .

4Press the arrow buttons until Use Factory appears, and then press .

5Press again.

6When prompted, press the arrow buttons to select a language, and then press .

7Press the arrow buttons to select a country, and then press .

Initial Setup Complete appears on the display.

Maintaining the printer

102