Lexmark 3600, 4600 manual 107, Using Macintosh, For Mac OS X version 10.4 and earlier

Using Macintosh

For Mac OS X version 10.5

1From the Finder desktop, click  System Preferences  Print & Fax.

2From the Default Printer pop-up menu, check if the printer is the default printer.

If the printer is not the default printer, then you must select the printer for each file that you want to print.

If you want to set the printer as the default printer, then select the printer from the Default Printer pop-up menu.

3Click Open Print Queue.

The print queue dialog appears.

Make sure that the print job is not on hold. If the print job is on hold:

•If you want to resume a particular print job, choose the document name, and then click Resume.

•If you want to resume all print jobs in the queue, then click Resume Printer.

For Mac OS X version 10.4 and earlier

1From the Finder desktop, click Go  Utilities  Print Center or Printer Setup Utility. The Printer List dialog appears.

2Double-click the printer.

The print queue dialog appears.

•Make sure that the print job is not on hold. If the print job is on hold:

–If you want to resume a particular print job, choose the document name, and then click Resume.

–If you want to resume all print jobs in the queue, then click Start Jobs.

•If the printer is not in bold, then it is not the default printer. You must select the printer for each file that you want to print.

If you want to set the printer as the default printer:

a Go back to the Printer List dialog, and then select the printer. b Click Make Default.

DISCONNECT AND RECONNECT POWER SUPPLY

1Press to turn off the printer.

2Disconnect the power cord from the wall outlet.

3Remove the power supply from the printer.

4Reconnect the power supply to the printer.

5Plug the power cord into the wall outlet.

6Press to turn on the printer.

Troubleshooting

107