Lexmark 4600, 3600 manual Using Macintosh, For Mac OS X version 10.4 and earlier

23It may take a few minutes for your computer to recognize the new settings. To check on the status of your network: a Right-click the Wireless Network Connections icon.

b Select View Available Wireless Networks.

•If the network is listed but the computer is not connected, select the ad hoc network and then click Connect.

•If the network does not appear, wait a minute and then click Refresh network list.

24If this is the first time you will be setting up the printer for use on a wireless network, insert the installation software CD, and then follow the instructions on the Welcome screen.

Otherwise:

aClick Start.

bClick All Programs or Programs.

cSelect the printer program folder from the list, and then click Tools  Lexmark Wireless Setup Utility.

25When the available networks are displayed, provide the network name and the security information you created in steps 11-16. The utility will configure the printer for use with your computer.

26Store a copy of your network name and security information in a safe place for future reference.

Using Macintosh

1Make sure the computer is on.

2Create a network name.

For Mac OS X version 10.5

a From the Finder desktop, click  System Preferences. b Click Network.

c Click AirPort.

d From the Network Name pop-up menu, click Create Network. e Create a name for your ad hoc network, and then click OK.

For Mac OS X version 10.4 and earlier

a From the Finder desktop, click Go  Applications.

b From the Applications folder, double-click Internet Connect. c From the toolbar, click AirPort.

d From the Network pop-up menu, click Create Network. e Create a name for your ad hoc network, and then click OK.

3Write down the network name you chose so you can refer to it when running the wireless utility. Make sure you copy the exact spelling and capitalization.

SSID (name of your wireless network)

Installing the printer on a wireless network (selected models only)

42