Toshiba 32BV500B owner manual Connecting External Equipment, wall socket, Common Interface

Connecting External Equipment

Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the

wall socket.

	COMMON INTERFACE
	The Common Interface is
	for a Conditional Access
	Module (CAM).
Cable Holder Input	Component Video
	Inputs (YPbPr)

USB Input

Side Video Input

	PC/YPbPr/AV
	Audio Inputs
	Headphone
Aerial	On/Off Switch
Input

HDMI Input Sockets

Coaxial Digital	SPDIF
Audio Output
	Coax.OUT
PC VGA
Input

HDMI 2	HDMI 1
VGA

* a decoder could be Digital Satellite, Free to Air or any other compatible decoder.

SCART

Scart

Socket

Aerial cable:...........................................................

Connect the aerial to the socket on the rear of the television.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the television.

Before running first time installation, any connected devices to standy mode.

The phono sockets located on the side of the TV will accept L and R audio signals.

The Coaxial Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

decoder*

TV

HDMI® (High-Definition Multimedia Interface) is for using with a DVD decoder or other equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will also be displayed.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

A wide variety of external equipment can be connected to the television; therefore, the relevant owner’s manuals for all addi- tional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press SOURCE button to switch between sources.

IMPORTANT: Please do not connect a device to PC socket while using YPbPr input.

English - 7 -

00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ 10068433.indd 7 30.03.2011 14:31:23