Auto Tuning continued, Manual Tuning

The television can be tuned-in manually using Manual Tuning feature.

Select your Country, Language and Text language by using “” or “” and “” or “” buttons. Press “OK” or RED button to continue. To cancel, press BLUE button. The following menu will be displayed during the automatic tuning:

After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes.

Digital Manual Tuning

The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

Select Channel Search from the Installation menu and press OK.

Enter the multiplex number using the numeric buttons. The television will automatically search for that multiplex. When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated.

• Repeat as necessary.

Note: Press SOURCE button to switch between TV/ DTV.

Analogue Manual Tuning

The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film into the media recorder and press PLAY, then manually tune.

Press MENU and using the Left or Right button select Install menu.

Using the Down button select Program and key in the programme position to be tuned with the number buttons, we suggest Programme 0 for a media recorder.

Use the Down button to select Search then press the Left or Right button to search. The television will begin searching for channels.

Each signal will show on the television, if it is not your media recorder press the Left or Right button to restart the search.

When your media recorder signal is found, save the selection by pressing the Down button until Store is highlighted, then press the Left/Right or OK button to save.

Repeat for each programme position to be tuned then press BACK to finish.

Note: Press SOURCE button to select between TV or DTV.

English - 13 -

00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_

10068433.indd 13

30.03.2011 14:31:32

 

 

 

Page 14
Image 14
Toshiba 32BV500B owner manual Auto Tuning , Manual Tuning, Digital Manual Tuning, Analogue Manual Tuning