Toshiba 32BV500B owner manual Power Save Mode and Cable Holder, Environmental Information

Power Save Mode and Cable Holder

Environmental Information

•This television is designed to consume less energy to save environment.

•You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps:

•You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

•When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.

•Disconnect power when going away for longer time.

•Note that annually, using the TV set in Power Save Mode has more power efficiency than disconnecting the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.

•Please helps us to save environment by following these steps.

Repair Information

Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.

Using the Cable Holder

You can use the supplied cable holder as the following:

•Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.

•Place cables into the cable holder after all necessary connections are made.

English - 10 -

00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ 10068433.indd 10 30.03.2011 14:31:30