Toshiba 32BV500B owner manual Connecting an Hdmi or DVI Device to the Hdmi Input

Connecting an HDMI® or DVI Device to the HDMI

Input

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

NOTE:

•Some early HDMI equipment may not work properly with your latest HDMI TV.

•Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

To Connect an HDMI Device

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A con- nector) to the HDMI terminal and audio cables to the PC/Side AV/YPbPr sockets (see illustration).

•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).

•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.

Connect an HDMI cable (type A connector) to the HDMI ter- minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo ( ).

•If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

•HDMI cable transfers both video and audio. Separate analo- gue audio cables are not required (see illustration).

•To view the HDMI device video, press the SOURCE button to select HDMI 1 or HDMI 2.

2	1	HDMI Input
HDMI	HDMI
		Sockets

HDMI to DVI Adapter Cable (not supplied)

Audio cable for HDMI to television connection

(not supplied)

HDMI 2 HDMI 1

HDMI Input Sockets

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.

HDMI device

English - 8 -

00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ 10068433.indd 8 30.03.2011 14:31:24