Lexmark 3600, 4600 manual Cop ying, Making copies, Copying photos, Enlarging or reducing images

Copying

Making copies

1Load paper.

2Load the original document facedown on the scanner glass.

3From the printer control panel, press .

4Press the arrow buttons to select the number of copies, and then press or to set a color or black-and-white copy.

Note: The light is on when the printer is in color mode. The light is on when the printer is in black-and-white mode.

5Press .

Copying photos

1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, then see the instructions that came with the paper.)

2Place a photo facedown on the scanner glass.

3From the printer control panel, press .

4Press until Photo Reprint appears.

5Press the arrow buttons until Yes appears, and then press .

6Press the arrow buttons until the desired paper size appears. If your desired paper size is not on the list, select Other. Additional paper size options appear on the display.

Press when you make a selection.

7Press .

Note: Make sure you loaded a photo paper into the printer.

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Enlarging or reducing images

1Load paper.

2Load an original document facedown on the scanner glass.

3From the printer control panel, press .

4Press until Resize appears.

Copying

83