HP 7000 dl Router Snmp-server location string, Config#snmp-server location 5th Floor Network Room

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server location <string>

Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP) system location string. Use the no form of this command to return to the default value.

Syntax Description

“<string>”Alphanumeric string encased in quotation marks (up to 32 characters in length) used to populate the system location string.

Default Values

<string>ProCurve

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies a location of 5th Floor Network Room:

(config)#snmp-server location “5th Floor Network Room”

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 340