HP 7000 dl Router manual Crypto ca enroll name

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

crypto ca enroll <name>

Use the crypto ca enroll command to begin CA enrollment procedures.

Syntax Description

<name> Alphanumeric string (up to 32 characters) used to specify a CA profile.

Default Values

No defaults necessary for this command.

Command Modes

(config)# Global Configuration Mode

Functional Notes

The type of enrollment procedure is based on the enrollment command and its settings. See enrollment terminal on page 422 and enrollment url <url> on page 423 for more information. This command initiates a dialog that is used to fill in the parameters that make up an enrollment request to be forwarded to a certificate authority. Note that some of the parameters (such as IP address) may be filled in using the values supplied in the crypto ca profile (in which case, the enrollment dialog will not prompt for those parameters). Once all required parameters are defined using the dialog, this command assembles them into an enrollment request to be sent to a certificate authority (including the generation of public and private keys). See crypto ca profile for more information.

If enrollment is set to terminal, you may view the request on the terminal screen.

If enrollment is set to url, the request is sent automatically to the certificate authority using the URL specified by the enrollment url command.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 217