HP 7000 dl Router Flowcontrol none software, Config#line console 0 config-con 0#flowcontrol none

SROS Command Line Interface Reference Guide Line (Console) Interface Config Command Set

flowcontrol [none software in]

Use the flowcontrol command to set flow control for the line console.

Syntax Description

none	Set no flow control.
software in	Configure the Secure Router OS to derive flow control from the attached device.

Default Values

By default, flow control is set to none.

Command Modes

(config-con 0)# Console Interface Configuration Mode required

Usage Examples

The following example configures no flow control for the line console:

(config)#line console 0 (config-con 0)#flowcontrol none

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 878