HP 7000 dl Router manual Debug frame-relay events llc2 lmi, Events, Llc2, Lmi

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug frame-relay [events llc2 lmi]

Use the debug frame-relaycommand to activate debug messages associated with the Frame Relay operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

events	Activates debug messages for generic Frame Relay events (such as Frame Relay
	interface state)
llc2	Activates debug messages for the logical link control layer
lmi	Activates debug messages for the local management interface (such as DLCI
	status signaling state, etc.)

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug frame-relaycommand activates debug messages to aid in the troubleshooting of Frame Relay links.

Usage Examples

The following example activates all possible debug messages associated with Frame Relay operation:

>enable

#debug frame-relay events

#debug frame-relay llc2

#debug frame-relay lmi

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 71