IBM 8301 Post Error Code FRU/Action, Run Setup, Run Configuration, Printer, Communications Cable

POST Error Code	FRU/Action
6XX	1.	Diskette Drive
Not listed above
	2.	System Board
	3.	Riser card
	4.	External Drive Adapter
	5.	Diskette Drive Cable
	6.	Power Supply
762	1.	Run Setup
Math coprocessor configuration error
	2.	Processor
	3.	System Board
7XX	1.	Processor
Not listed above
	2.	System Board
962	1.	Run Configuration
Parallel port configuration error
	2.	Parallel Adapter (if installed)
	3.	System Board
9XX	1.	Printer
	2.	System Board
1047	1.	16-Bit AT	™	Fast SCSI Adapter
107X	1.	Check SCSI terminator installation
Check SCSI terminator installation
	2.	SCSI Cable
	3.	SCSI Terminator
	4.	SCSI Device
	5.	SCSI Adapter
1101	1.	Run Enhanced Diagnostics
Serial connector error, possible system board
failure
1101, 1102, 1106, 1108, 1109	1.	System Board
	2.	Any Serial Device
1107	1.	Communications Cable
	2.	System Board
1102	1.	Run Enhanced Diagnostics
Card selected feedback error
1103	1.	Run Enhanced Diagnostics
Port fails register check
	2.	System Board
1106	1.	Run Enhanced Diagnostics
Serial option cannot be turned off
	2.	System Board
1107	1.	Serial Device Cable
	2.	System Board
1110	1.	Run Enhanced Diagnostics
Register test failed
	2.	System Board
1116	1.	Run Enhanced Diagnostics
Interrupt error

114Hardware Maintenance Manual