IBM 8314, 8309 XXX PCI card, XXX No action, 025-00X-XXX IDE signal cable 025-01X-XXX, 025-04X-XXX

Diagnostic Error Code	FRU/Action
020-199-XXX	1.	Go to the ″Undetermined problems″
PCI test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
020-262-XXX	1.	PCI card
PCI system error
	2.	Riser card, if installed
	3.	System board
025-000-XXX	1.	No action
IDE interface Test Passed
025-00X-XXX	1.	IDE signal cable
025-01X-XXX
	2.	Check power supply
IDE interface failure
	3.	IDE device
	4.	System board
025-027-XXX	1.	IDE signal cable
IDE interface Configuration/Setup error
	2.	Flash the system
	3.	IDE device
	4.	System board
025-02X-XXX	1.	IDE signal cable
025-03X-XXX
	2.	Check power supply
025-04X-XXX
	3.	IDE device
IDE Interface failure
	4.	System board
025-195-XXX	1.	Information
IDE interface Test aborted by user
	2.	Re-start the test, if necessary
025-196-XXX	1.	Press F3 to review the log file
IDE interface test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
025-197-XXX	1.	Make sure the component that is called
IDE interface test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
025-198-XXX	1.	If a component is called out, make sure
IDE interface test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
025-199-XXX	1.	Go to the ″Undetermined problems″
IDE interface test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
030-000-XXX	1.	No action
SCSI interface Test Passed

Chapter 7. Symptom-to-FRU Index 99