IBM 8306 XXX Make sure the component that is called, XXX If a component is called out, make sure

Diagnostic Error Code	FRU/Action
035-196-XXX	1.	Press F3 to review the log file
RAID interface test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
035-197-XXX	1.	Make sure the component that is called
RAID interface test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
035-198-XXX	1.	If a component is called out, make sure
RAID interface test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
035-199-XXX	1.	Go to the ″Undetermined problems″
RAID interface test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
071-000-XXX	1.	No action
Audio port Interface Test Passed
071-00X-XXX	1.	Run Setup
071-01X-XXX
	2.	Flash the system
071-02X-XXX
	3.	System board
Audio port error
071-03X-XXX	1.	Speakers
Audio port failure
	2.	Microphone
	3.	Audio card, if installed
	4.	System board
071-04X-XXX	1.	Run Setup
Audio port failure
	2.	Audio card, if installed
	3.	System board
071-195-XXX	1.	Information
Audio port Test aborted by user
	2.	Re-start the test, if necessary
071-196-XXX	1.	Press F3 to review the log file
Audio port test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
071-197-XXX	1.	Make sure the component that is called
Audio port test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
071-198-XXX	1.	If a component is called out, make sure
Audio port test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section

Chapter 7. Symptom-to-FRU Index 101