IBM 8305, 8309, 8312, 8313, 8315 Types 8307, 8308, 8310, 8311, 8314, Power supply removal Types 8301

Types 8307, 8308, 8310, 8311, 8314, and 8315

To remove the hard disk drive, do the following:

1.Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover. See “Types 8307, 8308, 8310, 8311, 8314, and 8315” on page 41.

2.Disconnect all hard disk drive wires.

3.Remove the screws securing the hard disk drive.

4.Remove the hard disk drive.

Note: When replacing the hard disk drive, make sure you obtain the proper Recovery CD to install after you install the new hard drive.

Power supply removal

Types 8301 and 8302

To remove the power supply, do the following:

1.Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover. See “Removing the cover Types 8301 and 8302” on page 71.

2.Remove the black plastic spacer from the front left corner of the box.

3.Remove the power supply cables from the white plastic holder.

4.Remove the screw holding the power source from the front of the machine.

Chapter 6. FRU Removals 77