IBM 8309, 8312, 8313, 8315 Types 8307, 8308, 8310, 8311, 8314, Replacing the cover, Types 8301

Types 8307, 8308, 8310, 8311, 8314, and 8315

To remove the system board, do the following:

1.Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover. See “Types 8307, 8308, 8310, 8311, 8314, and 8315” on page 41.

2.See “Types 8307, 8308, 8310, 8311, 8314, and 8315” on page 80

3.Disconnect all wires connected to the system board.

4.Remove the six screws that attach the system board to the chassis.

5.Lift out the system board.

Replacing the cover, Types 8301 and 8302

After replacing parts, you need to replace the cover and reconnect cables, including telephone lines and power cords. Also, depending on the option that is installed, you might need to confirm the updated information in the IBM Setup Utility program. To replace the cover and connect cables to the computer:

1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside the computer.

2.Clear any cables that might impede the replacement of the cover.

Important:

Before replacing the cover, ensure that these cable routing measures are adhered to:

Chapter 6. FRU Removals 83