IBM 8308, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8304, 8302, 8303 manual Types 8305, 8306, 8309

2.Disconnect all wires that the power supply is attached to.

3.Remove the two screws that hold the power supply in place.

4.Lift the power supply out.

Types 8305, 8306, 8309, and 8313

1.Remove the cover. See “Types 8305, 8306, 8309, and 8313” on page 40.

2.Remove the four screws that hold the power supply to the back of the chassis.

3.The power supply is attached to the base of the chassis by a latch on the front. Slide the power supply forward to detach if from the chassis.

4.Lift out the power supply.

Chapter 6. FRU Removals 79