IBM 8312 Dbcs Japanese Display Adapter/A, to Image Adapter/A Image-I Adapter/A, Graphic, 210XXX1

POST Error Code	FRU/Action
185XXXX	1.	DBCS Japanese Display Adapter/A
	2.	System Board
	3.	Riser card
20001 to 20003	1.	Image Adapter/A
		Image-I Adapter/A
	2.	Memory Module DRAM, VRAM
20004	1.	Memory Module DRAM, VRAM
	2.	Image Adapter/A
		Image-I Adapter/A
20005 to 20010	1.	Image Adapter/A
		Image-I Adapter/A
	2.	Memory Module DRAM, VRAM
200XX	1.	Image Adapter/A
Not listed above
	2.	Image-I Adapter/A
	3.	Memory Module DRAM, VRAM
	4.	System Board
	5.	Riser card
20101 to 20103	1.	Printer/Scanner Option
	2.	Image Adapter/A
	3.	Memory Module DRAM, VRAM
20104	1.	Memory Module DRAM, VRAM
	2.	Printer/Scanner Option
	3.	Image Adapter/A
20105 to 20110	1.	Printer/Scanner Option
	2.	Image Adapter/A
	3.	Memory Module DRAM, VRAM
Image Adapter/A	1.	Replace memory module (shown in
Memory Test failure indicated by graphic of
		graphic)
adapter
206XX	1.	SCSI-2 Adapter
	2.	Any SCSI Device
	3.	System Board
	4.	Riser card
208XX	1.	Any SCSI Device
Verify there are no duplicate SCSI ID
settings on the same bus.
210XXXX	1.	SCSI Hard Disk Drive
Internal bus, size unknown
	2.	SCSI Adapter or System Board
210XXX1
	3.	SCSI Cable
External bus, size unknown
	4.	SCSI ID Switch (on some models)
Tape Drive amber LED remains on	1.	Tape Drive
	2.	SCSI Cable (internal)
	3.	SCSI Adapter or System Board

122Hardware Maintenance Manual