IBM 8311, 8308, 8312, 8313, 8310, 8315, 8314, 8301, 8304, 8302, 8303 manual Types 8305, 8306, 8309

To replace the cover and connect cables to your computer:

1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer.

2.Clear any cables that might impede the replacement of the cover.

3.Position the cover over the chassis and pivot it down over the computer until it snaps into place.

4.Reconnect the external cables and power cords to the computer. See “Installing external options” on page 31.

5.To update the configuration, see “Setup Utility program” on page 24.

Types 8305, 8306, 8309, and 8313

After working with options, you need to install any removed parts, replace the cover, and reconnect any cables, including telephone lines and power cords. Also, depending on the option that is installed, you might need to confirm the updated information in the IBM Setup Utility program.

To replace the cover and connect cables to your computer:

1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer.

2.Clear any cables that might impede the replacement of the cover.

3.Position the cover over the chassis and pivot it down over the computer until it snaps into place.

4.Reconnect the external cables and power cords to the computer. See “Installing external options” on page 31.

5.To update the configuration, see “Setup Utility program” on page 24.

Types 8307, 8308, 8310, 8311, 8314, and 8315

After working with options, you need to install any removed parts, replace the cover, and reconnect any cables, including telephone lines and power cords. Also,

68Hardware Maintenance Manual