IBM 8302, 8309, 8308, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8306, 8304, 8303, 8305 manual FRU Removals

4.Remove the metal shield from the drive bay by inserting a flat–blade screwdriver into one of the slots and gently pry it loose.

5.Pivot the drive bay latch handle toward the front of the computer and pivot the drive bay cage toward the front of the computer until the drive cage latch catches to the chassis.

6.Make sure the drive that you are installing is set correctly as either a master or a slave device.

vIf it is the first CD drive or DVD drive, set as a master device.

vIf it is an additional CD drive or DVD drive, set as a slave device.

vIf it is a hard disk drive, set as a slave device.

Refer to the documentation that comes with your drive for master/slave jumper information.

Chapter 6. FRU Removals 75