|
| |
| Maintenance And Servicing | |
| Risk of serious personal injury from accidental starting | |
WARNING | ||
or electric shock. Turn the Power Switch of the tool to its | ||
| ||
| “OFF” position and unplug the tool from its electrical outlet | |
| before performing any inspection, maintenance, or cleaning | |
| procedures. |
Damaged equipment can fail, causing serious personal injury. Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation.
2.After Use, clean external surfaces of the tool with clean, moist cloth.
3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Troubleshooting
Problem |
| Possible Causes |
|
| Probable Solutions | |||
Tool will not start | 1. No power at outlet. |
| 1. Check power at outlet. | |||||
| 2. Cord not connected. |
| 2. Check that cord is plugged in. | |||||
|
|
|
|
|
|
|
| |
|
| Maintenance Chart |
|
|
| |||
Maintenance Type | Before | After | Weekly | Monthly | Every 6 | Yearly | ||
Use | Use | Months | ||||||
Inspect tool for damage | X |
|
|
|
|
|
| |
(see #1, above) |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
Wipe off with clean, moist |
| X | X | X | X | X | ||
cloth |
| |||||||
|
|
|
|
|
|
| ||
SKU 41213 | For technical questions, please call | Page 16 |
