Technical Specifications
•Controller uses safe low voltage (24 VAC)
•Controller totally isolated from copier / printer
•Controller works on all copiers and with copier signals
•Compatible with Ricoh, Xerox, Minolta, Toshiba, Mita and Sharp color copiers
•High capacity US/Canadian changer available
•Two key coin inventory system adds measure of security
•Dimensions: 25.5" x 16" x 5.5"
•Weight: 46 lb
Warranty
The M7506 is warrantied against manufacturing defects for a period of one year from date of shipment, to be determined by the serial number on its main board's microchip. Warranties for components of the M7506, if different, supercede this general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a period of two years from date of manufacture, to be determined from the first four digits of its serial number (wwyy).
Also, the optional premium changer is warrantied against manufacturing defects for a period of two years from date of manufacture, to be determined from the first four digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two years from date of manufacture, to be determined from the first four digits of its serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period of one year from date of shipment, to be determined by the serial number on the card reader itself.
Advanced Technologies (Tekvend) agrees to repair or replace at its discretion any of the above items within the warranty periods specified for them. Advanced Technologies (Tekvend) agrees to pay ground return shipping and insurance on all warranty repair or replacements.
Advanced Technologies (Tekvend) cannot be responsible for any damage that occurs to product returned to it due to inadequate return shipment procedures. The shipper is responsible for ensuring that return shipment packaging is adequate and that the return shipment is adequately insured.
Advanced Technologies (Tekvend) does not warranty its product for damage caused by abusive use, vandalism, improper installation, and improper field repair. Installer is expected to use the original copier specific harness (sprig) supplied by Advanced Technologies (Tekvend), and install the M7506 on the originally specified copier, unless otherwise authorized.
