Specifications
FIG. 45
Intermittent flow rate does not represent the maximum service flow rate used for determining the soften- ers rated capacity and efficiency. Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
OTHER SPECIFICATIONS | MODEL 38306 | MODEL 39306 |
|
|
|
Type of ion exchange material | high capacity | high capacity |
|
|
|
Amount of resin (cu. ft.) | .78 | .78 |
|
|
|
Rated Softening Capacity (Grains @ Pounds Salt Dose) | 11,800 @ 2.3 | 11,800 @ 2.3 |
| 25,300 @ 7.4 | 25,300 @ 7.4 |
| 30,200 @ 12.5 | 30,200 @ 12.5 |
|
|
|
Efficiency Rating (Grains / Pound of Salt @ Minimum Salt Dose) | 5120 @ 2.3 | 5120 @ 2.3 |
|
|
|
Rated Service Flow Rate (gpm) | 7.5 | 7.5 |
|
|
|
Pressure Drop at Rated Service Flow Rate (psi) | 14 | 14 |
|
|
|
Intermittent Flow Rate @ 15 psi (gpm) | 7.9 | 7.9 |
|
|
|
Max. Drain Flow Rate (gpm) to Drain During Regeneration Cycle | 2.0 | 2.0 |
|
|
|
These systems conform to NSF / ANSI 44 for the specific performance claims as verified and substantiat- ed by test data.
The efficiency rating is only valid at the minimum stated salt dosage. These softeners were efficiency rated acocording to NSF / ANSI Standard 44.
Questions? Call The Kenmore Water Line
33
