3.Select APM BIOS Mode within the APM sub menu and be sure it is set to Enabled. If it is not, press Left Arrow (}) or Right Arrow (Æ) to change the setting.

4.Select Automatic Hardware Power Management.

5.Set Automatic Hardware Power Management to Enabled.

6.Select values for the three categories of power management (system power, processor speed, and display), as necessary.

7.Set Hard Disk to Enabled or Disabled. Note: This does not apply to SCSI drives.

8.Press Esc twice to return to the Configuration/Setup Utility program menu.

9.Before you exit from the program, select Save Settings from the Configuration/Setup Utility program menu.

10.To exit from the Configuration/Setup Utility program, press Esc and follow the instructions on the screen.

Automatic Power-On features

The Automatic Power-On features within the Power Management menu allow you to enable and disable features that turn on the computer automatically.

vSerial Port A Ring Detect: With this feature set to Enabled and an external modem connected to serial port (COM1), the computer will turn on automatically when a ring is detected on the modem.

vPCI Modem Ring Detect: With this feature set to Enabled , the computer will turn on automatically when a ring is detected on the internal modem.

vPCI Wake Up: This feature allow PCI cards that support this capability to wake the system.

vWake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event or a daily event.

vWake on LAN: If the computer has a properly configured token-ring or Ethernet LAN adapter card that is Wake on LAN-enabled and there is remote network management software, you can use the IBM-developed Wake on LAN feature. When you set Wake on LAN to Enabled, the computer will turn on when it receives a specific signal from another computer on the local area network (LAN).

270Hardware Maintenance Manual

Page 276
Image 276
IBM 8304, 8309, 8308, 8312, 8313, 8311, 8310, 8315, 8314, 8301, 8306, 8302, 8303, 8305 manual Automatic Power-On features